Polish Paste 3 in 1 3D Speed, 236 ml

Polish Paste 3 in 1 3D Speed, 236 ml can be used with any type of machine, any type of pad and is the most efficient AIO on the market if you choose to work manually. Besides the incredible paint correction and polishing capacity, 3D SPEED leaves behind a layer of synthetic paint sealant mixed with Montan wax. This patented blend creates a sealing material that offers long-lasting shine, with excellent resistance to high-heat climates, as well as corrosion resistance caused by exposure to chemical contamination. This mixed sealing material also provides excellent gloss, shine, and slickness for reducing dirt whenever you wash, dry, or wipe the finish in any way. Pasta Polish 3 in 1 3D Speed, 473 ml achieves three paint correction processes in a single step.

How to use:

- By hand:

Step 1: Using a clean, soft microfiber or foam applicator, apply a quarter drop to the applicator and then, using an overlapping circular motion, spread 3D Speed over a section of paint.

- With an orbital polisher:

Step 1: Apply 4-5 drops of Pasta Polish 3 in 1 3D Speed, 473 ml nickel-sized on the pad's face.
Step 2: Using a low to medium speed, spread 3D Speed over a section of paint
Step 3: Turn the sander to high speed and start working 3D Speed over the panel using an overlapping, crosshatch pattern for 2-4 minutes.
Step 4: Move to a new paint section and repeat the above process until an entire panel has been worked
Step 5: After the wax has dried to a haze, normally around 15 to 20 minutes, remove the wax starting with the panel where you first applied the wax and then following the path of travel, carefully remove the wax using clean, soft microfiber towels. Turn the towel or fold often to a clean side. For best results, frequently switch to a clean and dry microfiber towel.

- With a rotary polisher:

Step 1: Apply a circle of Pasta Polish 3 in 1 3D Speed, 473 ml around the middle of the pad's face.
Step 2: Using a low to medium speed, spread 3D Speed over a section of paint.
Step 3: Using a low to medium speed, start working 3D Speed over the panel using an overlapping, crosshatch pattern for 2-4 minutes.
Step 4: Move to a new paint section and repeat the above process until an entire panel has been worked with 3D SPEED.
Step 5: After the wax has dried to a haze, normally around 15 to 20 minutes, remove the wax starting with the panel where you first applied the wax and then following the path of travel, carefully remove the wax using clean, soft microfiber towels. Turn the towel or fold often to a clean side. For best results, frequently switch to a clean and dry microfiber towel.

Quantity: 236 ml