Corrosion Protection for Vehicles Mannol Anticor, 650ml

Corrosion Protection for Vehicles Mannol Anticor, 650ml is a high-quality anti-corrosive and anti-gravel agent in the form of an aerosol based on synthetic resins and rubbers. It is intended for the processing of the external and internal surfaces of a car body, the bottom, the wheel arches, the wings, the sorts, the lower surfaces of the car thresholds, etc. It is suitable for processing the inner surfaces of the hood, doors and body. amplifiers. For professional body repairs, it is used to protect the welds inside the panels, to protect the inner surfaces of new body panels, as well as to process wings, doors, tailgates, hoods, trunks, etc. before mounting on the car.

Properties:

- It reliably protects the body from the negative effects of road salt and de-icing reagents, all types of atmospheric effects, corrosion, protects from scratches caused by particles on the road surface (gravel, crushed stone, etc.);
- It has passivation properties, significantly slowing down the already started corrosion process;
- It forms a strong, smooth, indelible elastic film, with thixotropic properties (it can be applied in a thick layer without forming stains and self-leveling, and the scratches on it are prone to self-tightening), resistant to mechanical influences, moisture, salts, acids and alkalis after drying. It does not chip or wear out during operation;
- Penetrates effectively into the smallest cracks, displacing water from cracks, cracks and joints between body panels, forming an impermeable layer;
- It has excellent adhesion - it stays safe even on smooth, non-porous surfaces. It does not lose its adhesive properties at extremely high temperatures - it does not peel off and is kept safely on a heated surface;
- Neutral for metals, plastics, tires and paint;
- Resistant to extremely low temperatures, keeps its plasticity and does not crack;
- It has soundproofing and anti-vibration properties, significantly reducing road noise and vibrations of bodywork elements, thus increasing driving comfort;
- Dry quickly. The declared properties are obtained after complete drying.

Application: before applying the product, the surface must be thoroughly cleaned of rust, dirt and dust, grease, oil and other organic contaminants. For degreasing, we recommend using Mannol Brake Cleaner. For optimal results, it is recommended to apply the product at room temperature.

Shake well until the balloon inside is released and you can hear its sound. Then continue to shake the balloon for another minute. Keep it in a vertical position when spraying and spray in a layer of up to 1.5 mm at a distance of approximately 20-30 cm from the surface. Resistance to abrasion and corrosion increases with the thickness of the coating layer. For this reason, the spraying process must be repeated once or twice after a short drying time (1-2 minutes). In order to obtain a uniform coverage and not to leave untreated areas, spraying must be carried out in a cross pattern. The coating is not subject to other coloring.

Depending on the thickness of the layer and the weather conditions, the car is ready to move again in about 2 hours. Final drying takes 12-24 hours.

Careful! After application, clean the valve on the cylinder by spraying upside down until only the propellant gas is released!

Quantity: 650 ml