Ceramic Protection Kit CarPro CQuartz UK Edition and Reload, 30ml

Ceramic Protection Kit CarPro CQuartz UK Edition and Reload, 30ml is based on CQuartz technology and has been developed in the UK to be used in cold climates. A new ingredient has been used to cure the ceramic layer in difficult conditions, and the silica-quartz content has been increased to a ratio of 70%. These improvements allow for the application of protection at lower temperatures, down to 5 °C, with higher levels of protection and shine, making it the unofficial pinnacle of the Cquartz line for enthusiasts.

 - 70% silica-quartz with 99.99% purity;

 - suitable for cold climate areas;

Ceramic Protection Application Instructions:

1. You must wash the car very well using the two-bucket method.
2. Remove any tar or asphalt spots on the exterior of the car using dedicated solutions.
3. Decontaminate the entire exterior of the car using decontamination clay and lubricant.
4. Rinse the exterior and dry it.
5. Degrease the exterior using Isopropyl Alcohol.
6. Start applying the ceramic protection on small sections (40 x 40 cm), leave it for 10 - 20 seconds, and then wipe it off.

Warning: read the manufacturer's instructions, use protective equipment (gloves, mask as needed).

Recommendation: before applying the ceramic protection, we recommend applying a paint cleaner or polish. Any scratch on the paint will remain after applying the ceramic protection.

Contents:

1x Carpro UK 3.0 Ceramic Protection, 30ml
1x Carpro Reload, 100ml
1x Ceramic Protection Applicator
5x Suede Cloths, 10x10cm
1x Suede Cloth, 40x40cm