Car Washing Set Pro Detailing LS3 Foam Cannon and Shampoo

The LS3 Foam Cannon has different adapters:

- Bosch
- Karcher K-Series
- Karcher HD(professional)
- Lavor
- Nilfisk Alto
- Parkside

Please add in the comment section which one do you need!

Car Washing Set Pro Detailing LS3 Foam Cannon and Shampoo contains:

Foam Cannon for Pressure Washer Pro Detailing LS3 is the lance that most detailers use in car pre-washing. It can be used for:

- personal use (personal car washing, detailing, etc.);
- industrial use;
- professional use;
- car washes;
- disinfection - private domain;

Foam Cannon for Pressure Washer Pro Detailing LS3 is easy to use, gives a perfect coverage of the entire vehicle, thus allowing a quality cleaning. It allows the adjustment of the angle of the foam jet between 0 and 40 degrees and the concentration of the foam (depending on the degree of dirtiness of the exterior of the vehicle). With the help of an adapter, you can connect it to most water jet cleaners: Karcher (K & HD), Bosch, Wap, Kranzle, Lavor, Faip, Portotehnica, Idropavese, etc.

With the Foam Cannon for Pressure Washer Pro Detailing LS3, you can pre-wash the car using active foam or car shampoo.

Nominal pressure: 160 bars
Maximum pressure: 180 bars
Flow rate: 12 liters / min
Maximum liquid temperature: 60°C
Tank: 1 liter
Coupling thread size: 1/4 Bsp F
The picture is informative.
The sold lance is made in Italy.

Contents: 1 pc

Car Pre-Wash Snow Foam Autobrite Direct Magifoam, 1000ml has been formulated to be an ultra foaming additive, which will produce a very dense and extremely stable foam when used through a foaming lance. Having a banana aroma, this product creates a stable foam that will last up to 30 minutes, which means that you will no longer wash the car in a hurry, having time to clean the rims, emblems or other places that require special attention. By using Autobrite Magifoam Car Prewash Foam, 1L as a prewash foam, the risk of inducing scratches when washing the car is dramatically reduced.

Characteristics:

- safe cleaning action;
- a high foaming power;
- banana flavor;
- very economical to use;
- produces a blanket of foam on the surface of the vehicle;
- it can be left on the surface of the car for up to 30 minutes, offering maximum penetration of the dirt layer;
- Autobrite Magifoam Car Prewash Foam, 1L contains biodegradable surfactants;
- the existing protection (wax, sealant) will not be attacked;
- the final appearance offered by this foam is a special one;

Instructions for use:

Car Pre-Wash Snow Foam Autobrite Direct Magifoam, 1000ml was formulated to be used in a foaming lance, with a dilution rate of 100:1, being very economical. From the tests done by the users of this product, it turned out that a dilution of 1:5 - 10 (100 - 200 ml per 1 liter of water (warm water is preferable)) is perfect for pre-washing the car, or even washing it, if the car is not very dirty. To use, rinse the surface of the car using the pressure device, then apply Autobrite Magifoam Auto Prewash Foam, 1L using a foaming lance. Let the solution act for 5 - 10 min, and then rinse the entire surface with water.

The longer the foam stays on the car, the more the dirt will be penetrated and softened, allowing it to be removed much more efficiently.

Warning: Keep this product away from children and animals. In case of ingestion, seek medical assistance immediately.

Content: 1 liter (HDPE container & original label)