3 in 1 Polish Paste 3D Speed, 946ml can be used with any type of machine, any type of pad and is the most efficient AIO on the market if you choose to work manually. In addition to the incredible ability to correct paint and polish, 3D SPEED leaves behind a sealant layer of synthetic paint mixed with Montan wax. This patented blend creates a sealing material that provides long-lasting shine, with excellent resistance to hot climates, as well as corrosion resistance caused by exposure to chemical contamination. This blended sealing material also provides excellent gloss, shine and slip to reduce dirt whenever you wash, dry or wipe the finish in any way. Polish 3 in 1 3D Speed paste, 946 ml performs three paint correction processes in one step.
How to use:
By hand:
Step 1: Using a clean, soft microfiber or foam applicator, apply a quarter drop to the applicator and then, using an overlapping circular motion, spread 3D Speed over a section of paint.
With orbital polish machine:
Step 1: Apply 4-5 drops of 3 in 1 Polish Paste 3D Speed, 946ml nickel size on the face of the swab.
Step 2: Using a low to medium speed, spread 3D Speed over a section of paint
Step 3: Turn the grinder to high speed and start working 3D Speed over the panel using a stacked, cross-hatched pattern for 2-4 minutes.
Step 4: Switch to a new section of paint and repeat the above process until an entire panel has been worked
Step 5: After the wax has dried to a mist, normally around 15 to 20 minutes, remove the wax starting with the panel where you first applied the wax and then following the path, gently and carefully remove the wax. using a clean, soft microfiber towel. Turn the towel over or fold it over on a clean side. For best results, often switch to a clean, dry microfiber towel.
With rotary polishing machine:
Step 1: Apply a circle of 3 in 1 Polish Paste 3D Speed, 946ml around the middle of the swab face.
Step 2: Using a low to medium speed, spread 3D Speed over a section of paint.
Step 3: Using a low to medium speed, start working 3D Speed over the panel using a stacked, cross-hatched pattern for 2-4 minutes.
Step 4: Switch to a new section of paint and repeat the above process until an entire panel has been worked with 3D SPEED.
Step 5: After the wax has dried to a mist, normally around 15 to 20 minutes, remove the wax starting with the panel where you first applied the wax and then following the path, gently and carefully remove the wax. using a clean, soft microfiber towel. Turn the towel over or fold it over on a clean side. For best results, often switch to a clean, dry microfiber towel.
Quantity: 946 ml
Inspirations for you:
